Cheap smart plugs to measure what your homelab actually costs to run
Heads up: some links in this article are affiliate links. If you buy through them I may earn a small commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. I only recommend gear I'd run myself.
Every homelabber has quietly wondered “wait, what is this actually costing me?” — and then never measured it. That’s a mistake, because the answer is often surprising in both directions, and you can’t make a rack cheaper to run if you can’t see where the watts go. The fix costs about ten dollars: an energy-monitoring smart plug. Here’s how to use one to put a real number on your homelab, and how it pays for itself.
Get a plug that measures energy (not just switches)
Two kinds of smart plug look identical and aren’t:
- Switch-only plugs turn things on and off. Useless here.
- Energy-monitoring plugs report live watts and cumulative kWh. This is the one you want — the spec to look for is “energy monitoring” or “power metering.”
Make sure it reports watts/kWh — a plain on/off smart plug won't measure anything.
Energy-monitoring smart plugs ↗Turn watts into dollars
The math is simple:
Monthly cost ≈ watts ÷ 1000 × 24 × 30 × (your $/kWh)
So a box that draws a steady 40W, at $0.15/kWh, is 0.04 × 24 × 30 × 0.15 ≈ $4.30/month.
A 15W mini PC is about $1.60/month. Read your electricity rate off a recent bill (it’s
in $/kWh), plug in the watts the smart plug reports, and you’ve got a real per-device
monthly figure instead of a vague worry.
What it catches (and why it pays for itself)
- The idle hog. That old tower “just running Plex” quietly pulling 90W at idle is ~$120 a year. A mini PC doing the same work at 12W is ~$16. Measuring is how you find that, and the plug pays for itself many times over the first time it sends an old box to retirement.
- The always-on tax. Networking gear, a NAS spinning drives 24/7, a UPS — individually small, collectively a line item. Seeing the total often changes what you leave running.
- Before/after proof. Swapping a power supply, enabling drive spin-down, or consolidating two boxes into one — measure before and after and you know it helped instead of hoping.
Two ways to use it
- Audit tour. Move one plug from device to device, noting the watts of each. A single afternoon gives you a full per-device breakdown for the price of one plug.
- Permanent watch. Leave plugs on the big consumers (server, NAS) and check the app monthly. Some plugs integrate with home-monitoring tools so you can graph it over time.
If you want the data in your own dashboards, look for local or Matter integration rather than cloud-only.
Smart plugs with local/Matter support ↗A note on ecosystem
If you self-host home automation, prefer plugs with local control (Matter, or locally-flashable firmware) over cloud-only ones — you’ll get the readings into your own dashboards and won’t depend on a vendor’s server staying alive. For a quick audit, any energy-monitoring plug and its app is enough.
The short version
Buy one energy-monitoring smart plug, tour it around your homelab, do the watts-to-dollars math, and you’ll finally know what the whole thing costs — and almost certainly find one device whose retirement pays for the plug and then some. Measuring is the first, cheapest step to a homelab that costs less to run.